diesel injection pump tester EPT-619D

Diesel injection pump tester EPT-619D check the electricmagnetic valve of distributor pumps.

EPT-619D fuel pump test bench

>>>>>>Characteristics

1. Changing frequency changing rotation speed2.  Small fall of rotation speed and large output torque3.  High measurement precision

4.  The functions of over voltage ,overload and short circuit protection5.  Ten kinds of rotation speeds presetting

6.  Constant temperature controlled

7.  Ultra low noise

8.  Operating position: arbitrary side of the two work sides of the test stand

9.  Rotation speed, count and temperature are displayed in digits mode, and air pressure is displayed on the mechanical gauge

10. Built-in air resource

>>>>>> Functions

1.  Measurement of each cylinder’s delivery at various rotation speeds

2.  Checking of each cylinder’s injection time with static state

3. Checking of the mechanical speed governors

4.  Checking of the electricmagnetic valve of distributor pumps

5.  Checking performance of the pneumatic speed governors

6.  Checking of the pressure compensators (LDA)

7.  Measurement of the reflux delivery of distributor pumps; (May selection) 

8.  Measurement of the internal pressure of the distributor pumps body

9.  Checking of the pneumatic speed governors’vacuum performance(May selection) 

10. Measurement of rack travel ( May  selection)

11. Checking of the sealing of fuel injection pump body .

>>>>>> Tecnnical Paramenters

1. Adjustable rotation speed range0~4000r/m

2. Double Series graduates45cc,150cc

3. Volume of oil tank60L

4. Temperature stabilization40±20C

5. Test oil filtering unit5μ

6. D.C.Supply12v/24v

7. Feed pressure low0~0.4Mpa.high0~4Mpa

8. Air pressure0~0.3Mpa

9. 3-phase power supply380V/50Hz or on request

10.  Flywheel inertia’s moment 0.8 Kg.M2

11. Center height 125 mm

12. Output power 5.5KW,7.5KW,11KW and 15KW or on request

13. Overall dimensions(mm)2370×960×1880

14. Net weight (KG)1300

diesel injection pump tester EPT-619D